English | Svenska | Polski | Türkçe | Deutsch | 日本語
Subscribe to our newsletter

Alert notification regarding the Multi-Purpose Nozzle (MPN)

It has come to the attention of Cold Cut Systems that there may have been an attempt to use a Multi-Purpose Nozzle
(MPN) with a non-adapted Cobra unit. It is strictly forbidden to operate an MPN on a Cobra system that has not been manufactured to accommodate its use. The reason is that the MPN nozzle is not designed to operate at 300 bars pressure. The MPN can only be attached to Cobra systems that have been manufactured or officially adapted to allow MPN operation. Any attempt to operate MPN on non-adapted Cobra systems could lead to a dangerous event occurring.

Cobra systems that have been manufactured or officially adapted to accommodate MPN operation are perfectly safe to use. Please refer to Appendix – MPN in the User and Service Manuals for specific guidance. Fire and Rescue Services who have Cobra and are unsure as to whether their systems are able to accommodate use of the MPN must refer to their User and Service Manuals or contact Cold Cut Systems direct.

Johan Ivarsson COO:

+ 46 300 40 41 41
+ 46 761 01 89 26
johan.ivarsson@coldcutsystems.com

Alert Notification Regarding the Multi Purpose Nozzle (MPN).pdf

Read More About

Multi-Purpose Nozzle (MPN)