Jun 8, 2022 | Scientific reports
SP Technical Research Institute of Sweden 2014 Robert Svensson, Johan Lindström, Raúl Ochoterena,Michael Försth Developing tactics for extinguishing fires located in structures is needed. Nowadays, the most commonly procedure employed by most fire brigades when...
Jun 8, 2022 | Scientific reports
Abstract Cold Cut Systems has evaluated what safety distances should be applied when using the cutting extinguisher. The safety distances should be considered a guideline and adapted to each organization’s own practical application. The safety distances...
Jun 7, 2022 | Scientific reports
FPA Technical Division A report produced by the Fire Protection Association commissioned by Greater Manchester Fire and Rescue Service 4/25/2013 Executive Summary Prior to this study Greater Manchester Fire and Rescue Service had good evidence for the firefighting...
Jun 7, 2022 | Scientific reports
2010 Södra Älvsborg Fire & Rescue Service (SERF) in collaboration with the SP Technical Research Institute of Sweden has conducted scientific studies based on reported and documented experiences from almost ten years’ practical implementation of the Cutting...
Jun 7, 2022 | Scientific reports
This study, from 2012, presents the first experimental measurement of the droplet diameters from a cutting extinguisher, the coldcut™ cobra. The results show that the spray from a cutting extinguisher is characterized by very small droplets. These measurements confirm...
Dec 14, 2021 | Scientific reports
Summary The Cobra ultra-high pressure water jet firefighting system is a Swedish invention that is used to fight fires both on land and at sea. The main application allows firefighters to fight fire in a modern, efficient and effective way from a safer location. Cobra...